Tango +L Printer Firmware | V2.10

Return to printer solutions | Printer drivers, firmware & software

Written By john.fieldsend 3rd May 2023

This is the latest firmware (V2.10) for the Tango +L printer model.

It is an executable file. To install, run the install program and follow the on-screen instructions.

This firmware update utility will only work if your printer is connected to the PC by a USB cable.

If your printer is connected by parallel cable (LPT), or by Ethernet (TCP/IP), download the ‘Binary Version’ of the firmware (s2087210.zip), then update the firmware using the Magicard Support Utility (Instructions below).

Why create an account?

Direct technical support

Create online support tickets with our industry leading and experienced support staff. Sign up

Register your products

Register your products with us for updates and warranty information. Register

What customers say about our support...

Alan M was a fab help! Quick to help and even called me back when we were cut off due to a power cut on my end! Called him back the following week and he remembered me and the problem i was having. Thanks Alan!!

Printer model: Pronto

Overall a good experience. Seemed quite expensive to repair our printer we sent in for RMA considering we could buy a brand new printer (newer model) for half the price..

Printer model: Enduro3e

Fragen wurden beantwortet, auch wen eine Kurzanleitung für das programm weiterhin fehlt

Printer model: Pronto100

Global support centres

UK

Waverley House Hampshire Road Granby Industrial Estate
Weymouth, DT4 9XD
United Kingdom

USA

148 E. Stiegel St
Manheim, 17545
United States

Middle East

5WB (West Wing) Office 446
Dubai Airport Free Zone, 371564
United Arab Emirates