Not pulling cards all the way out of the hopper.

Return to printer solutions | Card feed issue
Written By john.fieldsend

Not pulling cards all the way out of the hopper.

Follow the steps below

Step 1

Make sure you clean the printer rollers well. Video link to this procedure below.

 

Step 2

Make sure your cleaning cassette and cleaning roller are properly installed. Video link to this procedure below.

 

Step 3

If the above steps fail to resolve the issue it is possible that the o-ring drive belt has broken.
Take the left side panel off the printer ( two screws on the side and two or three on the back.)
Once removed look for a broken black O-Ring or band.

Step 4

If the O-Ring band is broken you can acquire a new one. Please contact technical support

Why create an account?

Direct technical support

Create online support tickets with our industry leading and experienced support staff. Sign up

Register your products

Register your products with us for updates and warranty information. Register

What customers say about our support...

Detailed instructions given to resolve the issue.

Printer model:

Thank you so much! The ID printer is working great and we really appreciate the honesty of your technicians! We could have easily been billed for repairs that weren't done, as our printer is no longer under warranty, but you didn\'t charge us at all. The technician superstar told me that it was a simple loose wire, which he reattached, and they shipped it back at no charge. Thank you!

Printer model: Pronto

Alan M was a fab help! Quick to help and even called me back when we were cut off due to a power cut on my end! Called him back the following week and he remembered me and the problem i was having. Thanks Alan!!

Printer model: Pronto

Global support centres

UK

Waverley House Hampshire Road Granby Industrial Estate
Weymouth, DT4 9XD
United Kingdom

USA

148 E. Stiegel St
Manheim, 17545
United States

Middle East

5WB (West Wing) Office 446
Dubai Airport Free Zone, 371564
United Arab Emirates