Barcodes not reading or printing out in resin black

Return to printer solutions | Problems with print quality
Written By john.fieldsend

Some badging applications send barcodes as a bitmap image and not a true type font.

To workaround this follow the steps below.

Shut down your badging application.

  1. Go to the start menu
  2. Devices and printers
  3. Right click the printer icon and select printing preferences
  4. Image tab > advanced > change the color correction to Gamma 1
  5. Then go to the card front tab
  6. click the black options button
  7. uncheck pictures use YMC only.

Click OK all the way out.

Reopen your badging application and print.

Why create an account?

Direct technical support

Create online support tickets with our industry leading and experienced support staff. Sign up

Register your products

Register your products with us for updates and warranty information. Register

What customers say about our support...

Alan M was a fab help! Quick to help and even called me back when we were cut off due to a power cut on my end! Called him back the following week and he remembered me and the problem i was having. Thanks Alan!!

Printer model: Pronto

This is my 1st interaction w/MagiCard Service, they responded immediately, resolved the issue and stood behind their warranty.

Printer model: Magicard 600

Customer service were very patient and helpful when communicating with me to figure out the problem with the machine! Thank you for the repair, printer works again! It did take a little longer than expected to get it back, about three weeks instead of two.

Printer model: Enduro3e

Global support centres

UK

Waverley House Hampshire Road Granby Industrial Estate
Weymouth, DT4 9XD
United Kingdom

USA

148 E. Stiegel St
Manheim, 17545
United States

Middle East

5WB (West Wing) Office 446
Dubai Airport Free Zone, 371564
United Arab Emirates